This reduces the chance of an injury while cleaning..

This step is much easier if you have a bagged vacuum, as you’ll just need to replace the old bag with a new one.It’s still a good idea to wipe down the compartment holding the bag though..

Never use a bagged vacuum without a bag, unless the manual says this is fine.The bag acts as the primary filter in a bagged vacuum.Without it, the pre-motor filter will become clogged much faster, and the motor may be more exposed to dirt..

Step 5: Clean the Vacuum’s Interior and Remove Clogs.This step can be performed throughout the cleaning process, but it’s easiest when the dust canister is removed and drying..

Whenever you notice any clumps of dirt or dust inside the vacuum, use a brush or cloth to wipe it.

If you can’t easily access the area, use a can of compressed air to blow it..Once the vacuum has been.

positioned correctly over a bin., emptying the Shark WV200UK is as simple as pressing the “One Touch Easy Empty” slider located next to the On/Off switch..

Pressing this button causes the vacuum’s bin to hinge downwards.Most dirt, hair, and other debris should fall into the bin, but you may need to give it a gentle tap to remove anything that remains.. Shark also recommends tapping the filter screen to get rid of dirt and debris that might be stuck on it.